Product

Sander Machine - Wide Belt Sanders, Belt Sander, Wide Belt Sanding, Surface Sander

Sander Machine  - Wide Belt Sanders, Belt Sander, Wide Belt Sanding, Surface Sander

Sander Machine

Product ID: GF Series

OPTIONAL ACCESSORIES:

  • Panel cleaning brush.
  • Air blow sanding belt cleaning device.
  • Digital position controller.
  • Frequency inverter.

 

 

 

 

 


Wide Belt Sander

 
Wide Belt Sander



Wide Belt Sander


Wide Belt Sander






Centralized Control Panel
All motion controls of the machine are centralized on a control panel.


Digital Positon Controller  
(Optional)
The conveyor table adjustment is controlled by the digital position controller, providing accurate digital readout. The sanding thickness can be preset for maximum operation convenience.










 Wide Belt Sander 


Sanding Belt Tension Control
The sanding belt tension is actuated by air cylinder, and oscillation tracking is controlled by photocell sensor.











Wide Belt Sander
Panel Cleaning  Brush Roller (Optional)
Built at outfeed end of the machine, this panel cleaning brush roller clean powder on the sanded panel.





Wide Belt SanderHigh Belt
The sander employs high quality for long service life.










Wide Belt Sander
Additional Emergency Stop Switch

An additional emergency stop switch is provided on rear of the machine, providing convenient and immediate stop control of all operating systems.






  
Wide Belt Sander
Variable Feed Speed Device

The variable feed speed of the conveyor belt is achieved trough variable speed pulley, permitting for sanding a variety of panel material, Feed speed is adjusted by turning a speed regulator knob.







Wide Belt Sander

Large, clearly identified push buttons simplify setup and start up.

ModelGF-9100AGF-91000AGF-6150AGF-61500A
Working width 920mm(36') 920mm(36') 610mm(24') 610mm(24')
Working height 150mm(8') 150mm(8') 150mm(8') 150mm(8')
Main motor standard 20 , 15 HP 20 , 15 ,15HP 15 , 10HP 15 ,15 ,10 HP
Feed motor 2HP 3HP 2HP 3HP
Table hoist motor 1/2HP 1/2HP 1/2HP 1/2HP
Feed speeds (Variable) 4-16 M/min 4-16 M/min 4-16 M/min 4-16 M/min
Sanding belt size 36"x60" 36"x60" 24 24
Compressed air required 5 kg/cm² 5 kg/cm² 5 kg/cm² 5 kg/cm²
Exhaust volume requirement 3,500 M³/Hr 3,500 M³/Hr 3,090 M³/Hr 3,090 M³/Hr
Net / Gross weight 2000 /2300 kg 2500 /2800 kg  1500 /1700 kg 2000 /2200kg

Contact Detail
Contact:Olivia
Address:No. 29, Chien-Cheng Lane, Beitun District Taichung City, 406 Taiwan
TEL:886-4-22394422
FAX:886-4-22394420
Email:gau.fong@msa.hinet.net
URL:http://www.woodmachine.com.tw
ZIP:406