Sander Machine - Wide Belt Sanders, Belt Sander, Wide Belt Sanding, Surface Sander

Sander Machine  - Wide Belt Sanders, Belt Sander, Wide Belt Sanding, Surface Sander

Sander Machine

Product ID: GF-1400L Series


22 Firmly Supported Feed Speed Change Mechanism (Patented)

The feed speed change mechanism is firmly supported by an additional screw.
This effectively avoids abnormal wearing on the conveyor table jack screws, while ensuring the surface accuracy of the conveyor table.


Convenient Size Correcting

Sanding size error can be fast and conveniently corrected by adjusting the parallelism. Between the sanding belt drive rollers.

European Imported Motor (Optional)

Upon request, the machine is compatible with European imported motor for upgrading efficiency and minimum trouble.

Timing Belt Transmission

The machine employ imported high quality timing belt, providing full power transmission without belt slipping problem.

Brake Controlled by Photocell Sensor

In case sanding belt runs out of normal track or breaks, the photocell sensors actuate brake immediately. This avoids damaging on machine while providing a dependable safety protection. (Conventional limit switch is often damaged and insufficient for safety protection.)

Automatic Lubricator (Optional)

The lubricator provides automatic and frequent lubrication to the conveyor table elevation mechanism. It ensures smooth elevation motion and high positioning accuracy, and extends pants service life.

Precision Ball Screw

The conveyor table elevation is transmitted through the imported high precision ball screws. Loading capacity on each ball screw is 1.8tons. Accuracy tolerance is ±0.005mm

Sanding Belt Tension Elevation Cylinder

Employs oscillating bearing design to ensure smooth oscillation motion. High quality air cylinder features long service life.

  • Poweful Motor Drive
  • Big , Rubber Covered Contact Drum
  • Spring Loaded Pressure Rollers
  • Wera Resistan Pressure Plate
  • Variable Feed Speed
  • Power Conveyor Table Elevation Digital Position Control
  • Load-indication Amp. Meter
  • Emergency Stop Switch
  • Pressure Plate For Short Wood (Optional)
  • Steel Contact Roller (Optional)
  • Hydraulic Feed System (Optional)
Model GF-1400L-O GF-1400L-OOGF-1400L-OOO
Working width 1350mm 1350mm 1350mm
Working height 130mm  130mm 130mm
Main motor standard 50 HP  50 , 40HP 50 , 50 , 40 HP
Feed motor 3 HP  5HP 7 1/2 HP
Table hoist motor 1/2 HP  1/2HP 1HP
Feed speeds (Variable) 6-20 M/min 6-20 M/min 6-20 M/min
Sanding belt size 103"x52"  103"x52" 103"x52"
Compressed air required 6 kg/cm² 7 kg/cm² 7 kg/cm²
Exhaust volume requirement 3,500 M³/Hr  6860 M³/Hr 9870 M³/Hr
Net / Gross weight 3000 / 3100 kg  4700 / 4900 kg 6800 / 7000 kg
Contact Detail
Address:No. 29, Chien-Cheng Lane, Beitun District Taichung City, 406 Taiwan